300TE 4MATIC (124.290) L6-3.0L (103.985) (1991)
2. Press tight seated rear axle shaft out of rear axle shaft flange with extractor/pulling-in equipment 140 589 03 61 00, part 26
Note:
Observe locating pin if brake caliper and brake disc have already been removed.
3. Disengage cable (110) of parking brake at intermediate lever (110b), refer to Brakes and Traction Control - Parking Brake System - Parking
Brake Cable - Service and Repair - Procedures See: Brakes and Traction Control/Parking Brake System/Parking Brake Cable/Service and
Repair
4. Remove brake caliper (111). Secure brake caliper to prevent it tram tailing down. Refer to Brakes and Traction Control - Disc Brake System -
Brake Caliper - Service and Repair - Procedures See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair
On vehicles with ASR: Do not tension electrical cable of brake lining wear indicator (111h).
Installation note:
Replace self-locking hexagon bolts. Assemble brake hose or ASR cable without twisting. Torque wrench 001 589 66 21 00.
5. Remove; install brake disk (111c). Refer to Brakes and Traction Control - Disc Brake System - Brake Rotor/Disc - Service and Repair -
Procedures
Installation note:
Replace self-locking hexagon bolt (111d).
6. Remove install brake shoes (112) of parking brake.