350SDL (126.135) L6-3.5L DSL Turbo (603.970) (1990)
/l6-3.5l_dsl_turbo_(603.970)/Page-1426002.png)
Shown on model 124
5 Turn adjusting knob until the centering pin car, be completely inserted into centering bore and the notch on knob shows in direction of bore.
6 Push adjusting knob and remove centering pin.
Attention: Do not actuate sliding roof motor with centering pin inserted or adjusting knob pulled, since otherwise the control unit may be damaged or
the adjustment may become misadjusted.
Shown on model 124
