350SDL (126.135) L6-3.5L DSL Turbo (603.970) (1990)
Parking Brake Cable: Service and Repair
Front Cable
Removal and installation of front brake cable control
Summary
-
Unhook return spring (12) on mount, and turn back adjustment screw (3) on adjustment bracket (1).
-
Adjust parking brake. See: Adjustments
-
Remove collar bolt (5).
-
Disconnect brake cable (17) from intermediate lever (6).
-
Remove spring clip (13) from cable guide on frame floor.
-
Remove foot mat.
-
Remove cover at left below instrument panel.
-
Expose brake control cable (17) and unhook at pedal, remove spring clip (20) from cable guide.
-
Remove pipe clamps (38), for this purpose fold back carpet in rear compartment.
-
Open cable strap (41) at shifting block and pull out of heater box toward rear.
Removal, installation
1 Unhook return spring (12) on mount (14) and turn back adjustment screw (3) on adjustment bracket (1).
2 Disconnect brake cable (17) at intermediate lever (6), for this purpose pull cotter pin out of collar bolt (5) and remove collar bolt.
3 Remove spring clip (13) from cable guide on frame floor.