350SDL (126.135) L6-3.5L DSL Turbo (603.970) (1990)
229
compression spring
230
compression spring
231
Valve disk
232
O-ring
233
Plunger
233a
Filler piece
234
compression spring
235
Housing
236
B 16 snap ring
a
Supply bore from cylinder head
b
To oil pan
A
Former version
B
Current version
d1
32mm
d2
27mm
A
Previous version
B
Revised version
The outer diameter of the sealing surface on the chain tensioner housing has been enlarged by 2 mm since 07/87 making it necessary to install a
sealing ring (237) with dimensions of 27 x 32 mm (previously 25 x 30).
This modification prevents the formation of burrs on the sealing ring (picture, circular cut-out) when tightening the chain tensioner.
This chain tensioner can also be built into vehicles of earlier manufacture.
Special Tools
Commercially Available Tools