350SDL (126.135) L6-3.5L DSL Turbo (603.970) (1990)
Rules of conduct/Protective measures
-
As a general rule, carry out work on the running engine only if this is absolutely essential.
-
Before starting the engine, apply parking brake.
-
On models with manual transmission, move gearshift lever into Neutral position.
-
On models with automatic transmission, move selector lever into position "P" or "N" (with the exception of vehicles which do not have any
selector lever position "P").
-
On models which do not have selector lever position "P", secure selector lever to prevent it being operated unintentionally.
-
Wear closed and close-fitting work clothes.
-
Take off any jewelry, such as chains, rings etc.
-
If you have long hair, wear a suitable head cover.
-
Before commencing work on the running engine, check to obtain a general picture of the positioning of parts which may be hot.
-
When carrying out work when starting the engine or when engine is running, do not touch any hot and rotating parts.
Fig. A engine 904, 906
Fig. B engine 541, 542
NOTE: Vehicles with Stop switch:
Before commencing work on the running engine, check to obtain a general picture of the positioning of the Stop switch
If a danger exists, switch off engine with the Stop switch (S11). (On engine 904, 906, 541, 542)
First aid measures in the event of burns
-
Do not rub the part of the skin affected, pour plenty of cold water over the burn and cover over with sterile bandages.
-
Contact a doctor immediately.