350SDL (126.135) L6-3.5L DSL Turbo (603.970) (1990)
WARNING! Body must not be lifted off of jack stands!
5. Check alignment with testing and straightening pin (013b), correct, if required. If the pin points to the center of the test plate (013d), this indicates
a deviation of 0 mm.
Checking Alignment of Rear Shock Absorbers
Checking alignment of rear shock absorbers
Preliminary work: R and R rear shock absorbers. Refer to Service and Repair See: Service and Repair
For vehicles equipped with rear level control refer to Spring Strut
013
Testing and straightening tool
013a
Straightening bolt
013b
Testing and straightening pin
013c
Test sleeve
013e
Washer
013f
Hex. nut
72
Semi-trailing arm
76
Dome on frame floor