350SDL (126.135) L6-3.5L DSL Turbo (603.970) (1990)
7. Moisten sealing lip on window (18) with soapy water.
On windows (18) with sealing lip to facilitate inserting cutting wire (17).
8. Route the remaining outer wire loop between windshield (18) and body flange counterclockwise while pulling the excess cutting wire (17) into the
inside of the vehicle.
Ensure that cutting wire (17) is located below windshield (18) at all four corner points.
9. Install windlass (15) on opposite side of window (18) diagonal of puncture point.
10. Insert end of cutting wire (17) into coil of windlass (15) with the shorter end toward the windlass (15).