380SEC (126.043) V8-3.8L (116.963) (1982)
/v8-3.8l_(116.963)/Page-1375008.png)
33. Slide panel from the right into lefthand corner on front wall pillar.
34. Push panel forward and introduce defroster nozzles on heater box.
35. Position fastening screws at left and right below on panel.
36. Align panel vertically in such a manner that the wooden veneer strip of panel is in alignment with wooden vaneer strip of drivers door.
37. Tighten fastening screww at left and right below on panel.
