380SEC (126.043) V8-3.8L (116.963) (1982)
Engine Torque Strut: Service and Repair
NOTE: For loosening and tightening the lower hex. nut apply counterhold to piston rod at flats (arrows) for wrench provided for this purpose.
Observe tightening torque of 8 - 12 Nm, do not pull against the block.
Engine Shock Absorber, Left and Right - Removal and Installation
During installation, observe location of rubber buffers and cup washers
Engine shock absorber and layout are the same at the left and right
Right Engine Shock Absorber as Seen From Front