380SEC (126.043) V8-3.8L (116.963) (1982)
/v8-3.8l_(116.963)/Page-1187006.png)
On version starting 07/82.loosen connecting rod (87) by unscrewing Phillips head screw (arrow) with swivelling venetian blind (85) installed.
11
Remove clamp (90) with screwdriver and detach Bowden cables (see arrow).
Installation
12
Install Bowden cables. Insert frame (88) with connecting hose through opening of glove box and insert connecting rod (87) (version up to
06/82) or fasten with Phillips head screw (version starting 07/82) (arrow) and adjust center nozzle flap. Make sure that the connecting hose is
correctly seated.