380SEC (126.043) V8-3.8L (116.963) (1982)
Figure 3 - Vacuum Diagram
3.
Connect vacuum lines (according to vacuum diagram, Figure 3).
a.
Vehicles, model years 1981/1982
Connect vacuum line (3) to connection (4) on intake manifold (serves cylinder no. 5, Figure 3).
b.
Vehicles, model years 1983/1984
Cut through the black vacuum line (2) and connect with T-fitting (5). Connect vacuum line (3) from the T-fitting to the enrichment switch and
reroute under the air and fuel lines. The length of the vacuum line is approximately 700 mm (Figure 3).
1
Bracket
2
Vacuum line
3
Vacuum line
4
Vacuum connection
Cylinder no. 5 (M.Y. 1981/1982)
5
T-fitting
9
Vacuum restrictor
19
Temperature switch 16~C
(Engine oil)
37
Thermovalve
100
Acceleration enrichment switch
a
To main wiring harness
b
To ignition distributor
c
To check valve for air injection
W2
Ground, right front
(at headlamp assembly)
Figure 4 - 19 Temperature switch 16~C
4.
Pull plug connector from 16~C oil temperature switch (19, Figure 4).