380SEC (126.043) V8-3.8L (116.963) (1982)
11.
Remove cover of fuse/relay box, then release fuse carrier (a) and lift upwards (Figure 2).
12.
Attach connector block (X3O) on left side of driver's footwell area. The mounting holes are already present (Figure 3).
13.
Pull connector block wires with connectors into fuse/relay box and connect to fused-side of fuse carrier (a, Figure 4) as follows:
black/yellow wire to fuse 19,
black/red wire to fuse 8,
red/white wire to fuse 15.
Be sure to route the wires through the existing body wiring grommets
14.
Reattach fuse carrier.
15.
Close fuse/relay box.