380SL (107.045) V8-3.8L (116.960) (1982)
Heater Core Case: Service and Repair
Installation
INSTALLATION PROCEDURE:
Special Tool #108 589 01 37 00
Special Tools: Clip pliers for heater controls.
1. Lubricate both rubber grommets (18) in front wall with soap solution or the like.
2. Insert heater box under cross member (20) without center air duct (9) on side of passenger seat and place toward the left on tunnel.
NOTE: Make sure that during the insertion of the heater box toward the left the lower shoulder remains under cross member (20).
3. Guide both heater tubes (17) through rubber grommets (18).
4. Screw heater box to both holding brackets (21).