400E (124.034) V8-4.2L (119.975) (1992)
/v8-4.2l_(119.975)/Page-2751004.png)
21 00 right into guide block (lateral guide) and groove in angular lifting arm.
11 Install tilting/sliding sun roof top panel.
NOTE: Pull off adjusting gauges only following installation of tilting/sliding sun roof top panel.
12 Screw control cable to sliding carrier.
13 Actuate tilting/sliding sun roof cover several times in all positions.
14 Check mark on holder of tilting/sliding sun roof headlining in relation to mark on slide rail.
NOTE: If the mark is outside notches on slide rail, readjust control cable.
15 For further installation proceed in reverse order.
