400E (124.034) V8-4.2L (119.975) (1992)
Thermostat: Service and Repair
Removal and Installation
-
Drain coolant at radiator, See: Service and Repair
-
Model 129: unscrew dipstick tube from cylinder head.
-
Detach coolant hose (1) at thermostat housing.
-
Detach coolant thermostat housing cap (2).
Tighten to: 10 Nm.
-
Remove coolant thermostat (4).
-
Replace O-ring (3).
-
Install coolant thermostat.
Installation Note: The ball valve (arrow) must be at the highest point.
-
Continue installation in reverse sequence. Observe torque specifications.
-
Pour in coolant.
-
Check cooling system for leaks. See: Testing and Inspection