400E (124.034) V8-4.2L (119.975) (1992)
/v8-4.2l_(119.975)/Page-811002.png)
Figures 3 And 4
2. Pull up rubber gasket (2b) so that removal tool (A) can be inserted into both grooves of the guide rail.
3. Guide the two spring tabs (6) of the removal tool (A) between (arrows) the lower catches (7) and the retaining tabs (8) (Figure 3).
4. Press removal tool (A) vertically down into the two grooves (left and right arrows at bottom) until upper part of guide rail pops up.
Special Tools
Special Tools
