400E (124.034) V8-4.2L (119.975) (1992)
/v8-4.2l_(119.975)/Page-860001.png)
Ignition Cable: Service and Repair
Ignition Wire Replacement
Spark Plug Covers (21 And 22)
1.
Remove covers (21 and 22) from the cylinder head covers.
2.
Loosen the spark plug connectors by turning right and left and carefully lifting out.
Distributor Locations
3.
Remove the covers from the high voltage distributors.
4.
Unplug the spark plug wires from the distributor caps and remove the wires.
NOTE: Observe ignition wire routing.
5.
Reinstall the ignition wires in reverse manner.
Spark Plug Cable Routing
