400E (124.034) V8-4.2L (119.975) (1992)
/v8-4.2l_(119.975)/Page-311002.png)
t2 = Second Segment
t3 = Third Segment
t4 = Fourth Segment
d = Period for one crankshaft rotation
The crankshaft position is recognized from the voltage signals which are produced. The segment front edge generates a negative voltage signal.
The segment rear edge generates a positive voltage signal. Engine speed is determined by measuring the period (d) which is equal to one
crankshaft revolution.
SIGNAL
This AC voltage signal is used by the EZL/AKR control unit and transmitted via the controller area network (CAN) to the LH control unit.