400E (124.034) V8-4.2L (119.975) (1992)
/v8-4.2l_(119.975)/Page-1881002.png)
3 Pull off rubber sleeve (4) via serrations. Pay attention to correct seat of rubber sleeve on small diameter.
4 Pull rubber mount with grooved ball bearing and protective cap jointly from fork-type joint by means of two-legged puller 000 589 88 33 00 and
pulling arms 129 589 00 34 00
Installation note: Press rubber mount on fork4ype joint by means of pressing-on sleeve (05) 201 589 07 15 00 or 126 589 03 15 00, paying
