420SEL (126.035) V8-4.2L (116.965) (1986)
/v8-4.2l_(116.965)/Page-2123002.png)
5 Slide angular lifting arm up to stop in forward direction, tilt upwards and remove at an angle in inward direction.
NOTE: On model 126 coupe, unscrew lateral guide (guide block) from sliding-lifting roof frame prior to removing angular lifting arm (lower arrow).
Installation
6 Prior to installation, grease angular lifting arm with MB slide paste, part no. 001 989 14 51 on slide jaws and on moving parts.
NOTE: During installation pay attention to correct seat of slide jaws (arrows).
