420SEL (126.035) V8-4.2L (116.965) (1986)
/v8-4.2l_(116.965)/Page-2126002.png)
4 Unscrew guide plate at front of sliding roof frame and pull out connecting clip on cable control.
5 Let control cable run back.
6 Remove sliding roof cover in forward and upper direction.
Installation
7 Coat slide jaws and slide rails prior to installation thoroughly with MB slide paste, part no. 001 989 14 51.
8 For further installation proceed vice versa.
NOTE: Prior to installation of sliding roof headlining adjust slide angle brackets and sliding roof cover as required. See: Adjustments
