420SEL (126.035) V8-4.2L (116.965) (1986)
82b
Hex. head bolt
91
Wheel carrier
Illustrated on rear axle with anti-squat geometry and automatic level control 2nd version as of 9.85
10. Additional work on vehicles with level control:
a) Fasten lever (6) to stabilizer bar (77) by attaching bracket (12).
b) Vehicle level at rear axle: Check control point, adjust.
c = Locating holes in lever and in housing with automatic level control shaft in center position for 4 mm dia. pin
The stabilizer bar link is inserted into hole "a" on vehicles without anti-squat geometry, into hole "b" on vehicles with anti-squat geometry.