420SEL (126.035) V8-4.2L (116.965) (1986)
1
Remove circlip (11).
Installation Note
Upon insertion push circlip along entire circumference in upward direction by means of a screwdriver.
2
Tilt outside plate carrier (1) and remove plate package.
Installation Note
Pay attention to clutch plate sequence. Assemble clutch package according to transmission model designation.
3
Place assembly device (020) on spring retainer and tension until circlip (5) is exposed. Remove circlip (5). Release assembly fixture 126 589 02
14 00 and remove.
Installation Note
Upon insertion, check circlip for correct seat.