500SEC (140.070) V8-5.0L (119.970) (1993)
CD Changer: Service and Repair
Remove/Install CD Player With Changer
Quiescent current retention unit
disconnect, connect.
Ground cable at battery
disconnect, connect.
Cover (1)
remove, insert.
Bolts (2)
unscrew, screw in.
CD player with changer (A2/6) and mount
remove, insert.
NOTE: When inserting, push the mount in behind the body panel (arrow) to lock it.
Electrical connections (3)
disconnect, connect (changer for 10 CD's).
NOTE: As of approx.10.92 CD player with changer for 6 CD's and interface.
As of approx. 09.93 CD player with changer for 6 CD's without interface.
NOTE: After connecting the battery, the following fault may occur. The store is no longer ejected, or no longer locks in place.
Cause:
The cause is a faulty mode detection in the CD player with changer.
Remedy: