500SEC (140.070) V8-5.0L (119.970) (1993)
/v8-5.0l_(119.970)/Page-2636005.png)
pry (10 each).
12. Pull door liner (7) out of groove starting at top rear while simultaneously pulling door liner (7) away from inner door panel at bottom.
13. Unhook Bowden cable hook (11) on door interior actuating mechanism, unclip Bowden cable mount (13) on housing for door interior actuating
mechanism and pull out.
14. Disconnect plug connections (arrows) on seat adjustment switch (9).
15. Lay down door liner while guiding wires for entry light (6) through door liner.
16. Reassemble in opposite order. Observe installation note.
17. Check for proper function.
Sedan
Removal and installation of door liner on driver's door
