500SEC (140.070) V8-5.0L (119.970) (1993)
Install surround (5)
coat adhesive rubber lip with soapsuds, first slide in surround at the top (arrow) and press in, whilst pressing to one side and pressing the glass
forwards as for the removal of the inner panelling.
Self-tapping screws (figure 6)
screw in (4 pieces).
Reinstall in opposite order.
Rear Door
Preliminary work:
Removal and installation of outer sealing bar. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Weatherstrip/Service and
Repair/Remove/Install Sealing Rail/Outside
Window rail (3)
partially remove.
Body-bound rivet (4) on surround (1)
remove.
Screws (2, 4 pieces) on surround (1)
unscrew.
Surround (1)
remove, by first pulling surround (1) downwards and tilting outwards at the top. Then remove surround (1) from the window shaft upwards.
Reinstall in opposite order.
NOTE:
Surround 1 = 1st version
installed up to approx. 03/92.
Surround 2 = 2nd version
installed as of approx. 03/92.