500SEC (140.070) V8-5.0L (119.970) (1993)
/v8-5.0l_(119.970)/Page-2806003.png)
5.
Place plastic frame (2) on wood cover (1) and locate the exact position front and back by installing the respective switches (Figure 6).
6.
Using a 1.5 mm bit, drill holes for screws in wood cover (1). Use the plastic frame (2) as template and drill holes only 3 mm deep (arrow, Figure
6).
Hint:
Use of a drill depth gauge is recommended when drilling the 1.5 mm holes to a depth of 3 mm into the wood cover.
7.
Fasten plastic frame (2) on wood cover (1) with screws, part number 124 990 00 30 (arrows, Figure 7).
8.
Reinstall switches and wood cover (1).
Parts Information
