500SEC (140.070) V8-5.0L (119.970) (1993)
20. Tighten conrod nuts or conrod bolts. See: Connecting Rod/Service and Repair
21. Measure axial play of conrod bearings.
-
Examine clearance of conrod in the piston.
CAUTION:
-
Disassemble oil pump, clean, renew if necessary.
-
Replace oil delivery valve.
-
Clean oil filter, carefully clean air-to-oil cooler or replace.
-
Install initial operation oil filter element.
-
Change engine oil and oil filter element after 1000 - 1500 km.
With Washer Thrust Bearing
Preceding Work
-
Engine removed and disassembled.
-
Oil galleries in crankcases end in crankshaft cleaned.
-
Crankshaft examined for cracks, dimensional tolerance, hardness and concentricity.
Specifications