500SEC (140.070) V8-5.0L (119.970) (1993)
/v8-5.0l_(119.970)/Page-612001.png)
Crankshaft: Specifications
Main Bearing Cap Torque
Tightening Specifications
Stud Bolt In Crankcase ............................................................................................................................................................................................ 30 Nm
Crankshaft Bearing Stud Bolt
M 10 x 1 Nut ..................................................................................................................................................................................................... 50 Nm
M 10 x 40 Side Bolt (10.9) ............................................................................................................................................................................... 50 Nm
NOTE: The stud bolts loose their locking effect after being unscrewed and therefore should be replaced.
