500SEC (140.070) V8-5.0L (119.970) (1993)
Evaporator Temperature Sensor / Switch: Service and Repair
FRONT A/C
Lower section of covering under left side of dashboard
Remove. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
2-pole connector (B10/6x1)
Disconnect.
Evaporator temperature sensor (B10/6)
Pull out.
Temperature sensor
Check and renew if necessary.
Install
In the reverse sequence.
NOTE: Erase fault memory in the control unit.
REAR A/C (IF EQUIPPED)
Control unit for rear air conditioner
Remove. See: Control Assembly/Service and Repair
Center console
Remove. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair
Plug connection B10/11x11