500SEC (140.070) V8-5.0L (119.970) (1993)
/v8-5.0l_(119.970)/Page-2944001.png)
Brake Light Switch: Service and Repair
Removal
1. Remove cover below instrument panel
2. Disconnect electrical connection at stop lamp switch (S9)
3. Press locking device (S9b).
4. Turn and withdraw stop lamp switch (S9).
Installation Note: Withdraw actuating pin (S9a) completely. Depress brake pedal (24), insert and turn stop lamp switch (S9) until the locking
device (S9b) engages. The actuating travel is self-adjusting.
5. Install in reverse sequence
