500SEC (140.070) V8-5.0L (119.970) (1993)
/v8-5.0l_(119.970)/Page-951003.png)
Correcting
11. Slacken nut (arrow) of setting slide and move it until the fixing device (4), special tool 119 589 00 21 00, engages in the measuring cam (1).
12. Screw on setting slide (3) and remove fixing device (4).
13. Insert TDC-sensor (2) and screw on (arrow).
14. Remove dial gauge and measuring pin.
15. Install in the reverse order beginning from step 5.
