500SEC (140.070) V8-5.0L (119.970) (1993)
/v8-5.0l_(119.970)/Page-2089004.png)
-
With steering gear removed, unscrew P-valve (Y10). Absolute cleanliness is required.
-
Replace the seal (Y10/1).
-
Torque to 70 Nm on installation.
Remove, Install & Check Bearing Cover w/ Pitman Arm Shaft
Steering Gear with Adjusting Screw Below:
-
Pay attention to "Important Notes Regarding Repair of Steering Gear"
-
Remove steering gear from vehicle if not already done.
-
For special tool information, See: Tools and Equipment
Removal:
