500SEC (140.070) V8-5.0L (119.970) (1993)
Ball Joint: Testing and Inspection
AR33.20-P-0426A Check Follower Joint of Steering Knuckle Mount (Installed)
Checking Follower Joint Of Steering Knuckle Mount (installed)
Diagram Left
Diagram Right
1
Raise vehicle at front
NOTE: Check for cracks and damage, if findings are negative: Replace upper transverse control arm (6).
2
Check boot (8f)
3
Check play in follower joint
NOTE:
-
By pulling and pushing vigorously on the front wheel while feeling the following joint at the same time.
-
If in poor condition, Replace upper transverse control arm (6).