500SEC (140.070) V8-5.0L (119.970) (1993)
/v8-5.0l_(119.970)/Page-1543005.png)
6. Determine clearance "A" using a feeler gauge. Adjust clearance to 0.7 - 1.3 mm.
NOTE: Adjust clearance "A" using the snap ring available in 3 thicknesses (2.0, 2.5, 3.0 mm). The groove for the snap ring is 3.2 mm wide. If
the specified clearance "A" is not achieved using the snap ring (11), the middle outside discs must also be used to correct the clearance.
