500SEC (140.070) V8-5.0L (119.970) (1993)
/v8-5.0l_(119.970)/Page-1560001.png)
Fluid Pump: Service and Repair
NOTE: On vehicles produced prior to 6/96 a secondary pump is used, after 6/96 a cover is placed where the pump was located.
Removal and Installation
1
Unscrew nut tor axial retainer (44).
2
Unscrew hexagon socket bolts (45) and remove cover.
Installation Note
The slot (arrow) in the axial retainer (43) must be horizontal.
1
Transmission housing
13 Lower cover
14 large intermediate plele
19 Gasket
49 Check valve (not used any more on vehicles as of approx. 6/91)
66 Valve, secondary pump (not used any more on vehicles as of approx. 6/91)
67 Check valve (not used any more on vehicles as of approx. 6/91)
The bores in the transmission housing for the secondary pump are sealed off by means of a cover (17) and gasket (18).
