500SEC (140.070) V8-5.0L (119.970) (1993)
Windshield Washer Reservoir: Service and Repair
Preliminary work:
Front bumper removed.
Right lamp unit removed, refer to "Replacing Headlamp Unit". See: Lighting and Horns/Headlamp/Service and Repair
Removal
Filler pipe (4) with bolt
unscrew and take out.
Lines to heat exchanger with screws (1)
slacken and pull off.
4 bolts on engine compartment lining below washer reservoir.
unscrew.
Washer fluid indicator (2)
withdraw.
Washer reservoir with nuts (3)
unscrew.
Washer reservoir
take out downwards.
Washer pump
withdraw.
Installation
Installation is performed in reverse order.
NOTE: Coat filler pipe (4) at reservoir with lubricant (e.g. soft soap) to ensure the rubber seal does not drop into the reservoir when the filler
connection is pressed into the reservoir.