500SEL (126.037) V8-5.0L (117.963) (1984)
/v8-5.0l_(117.963)/Page-590004.png)
10
If the bracket is not fitted, take out windshield washer bottle, place to the side and remove battery.
11
Remove tension spring of hood.
12
Cut out drilling template.
13
Place drilling template below the right hood hinge at the reinforcing plate and push back far enough (arrow) for a resistance to be felt. Mark both
holes and drill (5.5 mm dia.).
14
Insert bracket 123 800 00 18 from the outside and attach in engine compartment with A 5.3 washers and M 5 nuts.
