mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 5034 > < Diagram Information and Instructions|Page 5032
Page 5
background image

3

Temperature dial

4

Push-button switch unit with 5 functions

5

Blower switch

Function selection "e" (Off):
Selecting this function will switch off the air supply through main air flap into inside of vehicle. (e.g., in the event of unpleasant outside dust or odors).

The electronic system continues to operate while driving and the monovalve (11) remains closed. Blower is not operating.

Function selection "d" (refrigerant compressor off)

EC (ECONOMY.- refrigerant compressor is off). System operates with fresh air only.

In heating range, tempered air will flow out of footwell and side nozzles, with a leak air share from defroster nozzles. The windshield will be provided
with lust enough air to remain free of fog during normal weather conditions.

In venting range, air is routed to air inlets in center of instrument panel and to lateral vents only. The minimum in-car temperature depends on outside
temperature and on solar radiation.

At low outside temperatures, the air supply and the blower remain in off position until the engine is heated to approx. 35 °C by the coolant. The blower
operates in stages 3 to 5 at "AUTOM".

We recommend the above function selection at outside temperatures, at which no cooling of fresh air is required (to save fuel).

Diagram Information and Instructions|Page 5034 > < Diagram Information and Instructions|Page 5032