500SEL (126.037) V8-5.0L (117.963) (1984)
/v8-5.0l_(117.963)/Page-1354003.png)
6. Remove clamps (arrow) on cover (46) for air outlet, center by means of a screwdriver and lift cover (46) from heater box.
7. Remove sealing rubber (47) from water pipes.
8. Unscrew holder for heat exchanger pipes (49) from evaporator housing.
9. Remove center part (60) above diverter flap and lift out heat exchanger, while slightly opening footwell flaps.
Installation:
10. Open footwell flaps and install heat exchanger (51). Attach holder (49) for pipes.
