mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Ignition - Rotor Updated|Page 899 > < Distributor Cap|Specifications
Page 1
background image

Ignition Rotor: All Technical Service Bulletins
Ignition - Rotor Updated

TO:

OUR MERCEDES-BENZ PASSENGER CAR DEALERS

DATE:

November, 1983                       REF.NO. MBNA 15/2

SUBJECT:

MODIFIED IGNITION DISTRIBUTOR ROTOR MODELS 107 AND 126

As of August 1983, a modified distributor rotor was phased into production. The new rotor is identified by a protruding ring (figure, arrow). The part
number 000 158 36 31 remains unchanged.

The previous-version rotor may cause difficult engine starting. Therefore, the improved version rotor is to be installed in all of the following vehicles
during regular maintenance..

Production Phase-In
*Please refer to explanation of the newly modified Vehicle Identification Numbers (VIN) in S.I. 00/38.

Arrow - Identification of modified ignition rotor
Please identify the top of the distributor cap with a red dot after replacement of the rotor.

All previous version rotors in your parts stock must be returned with AFA Form MBNA 512.

Time Allowance:

0.1 hour

Ignition - Rotor Updated|Page 899 > < Distributor Cap|Specifications