500SEL (126.037) V8-5.0L (117.963) (1984)
Air Bag Control Module: Removal and Replacement
First Type
Tools and Equipment
NOTE: The second type is distinguished by:
-
Modified arrangement of lead to control unit under heater housing towards front passenger compartment on right.
-
Changed location of red, 10-pin plug connector from footrest to panel situated below footrest.
Removal:
1. Turn ignition key to position "0", disconnect and insulate negative battery terminal.
2. Remove floor mat on right side of driver's footwell.
3. Remove footrest from bulkhead (arrowed).