500SEL (126.037) V8-5.0L (117.963) (1984)
/v8-5.0l_(117.963)/Page-1192002.png)
2nd version is identified by flange (arrow). In the even of repairs, install rubber bearing of 2nd version on principle.
The tool required for removal and installation of rubber bearing into bearing carrier comprises 7 parts.
Removing front rubber bearing
1. Clamp bearing carrier into vise in such a manner that front rubber bearing is easily accessible. Insert spacing tube (045d), supporting ring (045e),
tensioning screw (045a) and sleeve (045c).
