500SEL (126.037) V8-5.0L (117.963) (1984)
9. Connect stabilizer bar support (80) with wheel carrier (91).
Note:
The contact surfaces must be absolutely clean and free of grease and oil. When tightening ensure that the inner bushing for the rubber
bushing is properly seated on the wheel carrier.
Tighten necked down bolt for wheel carrier support on stabilizer bar only with vehicle sitting on wheels ready-to-drive (80 Nm).
77
Stabilizer bar
80a
Tab
80b
Rubber bushing
80c
Necked down bolt
80d
Washer
80e
Clamping sleeves
80f
Hex. head bolts with washers and self-locking nuts
80h
Inner bushing for rubber bushing
81
Rubber bushing for stabilizer bar mount on frame floor
82
Bottom retaining bracket
82a
Retaining plate