500SEL (126.037) V8-5.0L (117.963) (1984)
Caution: Renew tensioning washer (79a) after one-time use. Oil tensioning washer (79a) in area of the bolt head.
3. If required, press off or pull on rear axle shaft at rear axle shaft flange with assembly tool 201 589 00 61 00
Caution: when removing assembly tool, be sure to hold rear axle shaft in place. Do not drop rear axle shaft, so that housing for inner joint will
not be damaged or start leaking.
4. Detach, tighten up hexagon nuts for attaching the coupled semi-trailing arm (arrow).
5. Remove, assemble coupled semi-trailing arm.
Caution: During removal and transportation of semi-trailing arm, do not damage cover plate of brake disc.