500SEL (126.037) V8-5.0L (117.963) (1984)
/v8-5.0l_(117.963)/Page-1272004.png)
End play 0.03-0.06 mm.
Dial gauge holder 363 589 02 21 00, dial gauge.
If there is no longer any end play present due to over-tightening the slot nut, do not correct this by loosening the slot nut, but always install a new
spacing sleeve and adjust end play again.
Secure slot nut (070) by bending over at two points in the matching grooves (arrows) in the rear axle shaft flange (78).
8.
Drive rear axle shaft flange out of the wheel carrier with impact puller 201 589 10 33 00 and remove.
