500SEL (126.037) V8-5.0L (117.963) (1984)
/v8-5.0l_(117.963)/Page-1272008.png)
14.
Remove or put on spacing sleeve (arrow).
Note: Generally renew spacing sleeve after it has been used once.
Width of spacing sleeve 11.8 - 12.0 mm.
15.
Clamp assembly plate 136 589 05 31 00 (078) with rear axle shaft flange (78) in vise.
16.
Put on or remove thrust pad 000 589 03 34 00 (078a) for supporting the puller.