500SL (129.067) V8-5.0L (119.960) (1990)
/v8-5.0l_(119.960)/Page-796003.png)
21. Unscrew fan carrier from crankcase.
22. Remove belt pulley together with vibration damper, hub and seat. See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service
and Repair
23. Remove radial seal. See: Seals and Gaskets/Front Crankshaft Seal/Service and Repair
24. Unscrew bolts (1), take off cover (2) of coolant pump with engine lifting eye, discard gasket (2a).
Installation Note: Replace coolant pump gasket.
25. Unscrew coolant pump, take off.
Installation Note: Install bolts with washers as specified in image.
26. Unscrew bolts (1) with washers.
-
Take off carrier with guide pulley.
