500SL (129067) V8-50L (119972) (1993) - Seat Cover Service and Repair - Page 8878
Screws (1) (2 each)
unscrew.
Handle recess (2)
remove.
Screws (3) (4 each)
unscrew and remove.
Screws (4 and 5)
unscrew.
Covering (6)
remove toward rear while pulling upward. Observe installation note.
Installation note
When installing, insert covering (6) with insert clip at bottom on backrest bearing bolt, then insert at top into cover on head restraint brace.