500SL (129.067) V8-5.0L (119.972) (1993)
Control cable for outside backrest lock.
Side covering on backrest frame removed. See: Seat Cover/Service and Repair/Procedures
Clamping nut on release handle
loosen.
Nut on pull sleeve
unscrew. When installing do not turn pull sleeve.
Control cable and pull sleeve
unhook on release handle.
Bolt on backrest hinge
remove (backrest unlocked).
Locking mechanism
pull downward slightly, unhook control cable and pull up and out.
Do not damage plastic bushings in backrest hinge when installing.
Removal, Installation
Cable control for inside backrest lock
1
Unscrew handle recess and remove.
2
Loosen clamping nut and screw off nut for pull sleeve (arrows).
3
Remove control cable and pull sleeve on release handle.